How To Remove Toyota Tacoma Tailgate

Toyota Tacoma Owners Manual: Tailgate

The tailgate can be opened.

Pull the handle

Open the tailgate slowly Pull the handle

The support cables will hold the tailgate horizontal. Open up the tailgate slowly

The support cables will hold the tailgate horizontal.

Afterward closing the tailgate, try pulling information technology toward you to make certain it is securely locked.

Removing the tailgate

■ Earlier removing the tailgate (vehicles with rear view monitor arrangement)

These connector covers are used when removing the tailgate, to prevent the back-up photographic camera wire harness connectors from being contaminated.

Connector cover (Gray)

Connector cover (White) Connector cover (Gray)

Store the connector covers in the glove box in a plastic bag when not using. Connector embrace (White)

Shop the connector covers in the glove box in a plastic bag when not using.

To disconnect the wire harness connectors (

To disconnect the wire harness connectors ( and ), press and hold the lock of the tailgate wire harness connector (White) and pull apart.

Tailgate wire harness connector (White) Frame wire harness connector (Greyness)

Attach the connector cover (white) to the frame wire harness connector (Gray).

Attach the connector encompass (white) to the frame wire harness connector (Grayness).

Frame wire harness connector (Gray) Connector cover (White)

Pull out the plastic wire protector located in the vehicle bed by pressing the Frame wire harness connector (Grey)

Pull out the plastic wire protector located in the vehicle bed by pressing the tabs and pulling the protector.

Exist conscientious not to pull out all of the tailgate wire harness. Doing so may result in harm to vehicle components.

Open the tailgate. Plastic wire protector

Open the tailgate.

Pull out the wire harness from the vehicle bed.

Attach the connector cover (Gray) to the tailgate wire harness connector (White).

Attach the connector encompass (Grey) to the tailgate wire harness connector (White).

(White) Tailgate wire harness connector (White)

■ Removing the tailgate Connector encompass (Greyness)

■ Removing the tailgate

Open the tailgate to the angle where you can release the brackets on the support

Open the tailgate to the angle where you can release the brackets on the support cables from the lugs on both sides.

Elevator the support cable bracket up and slide it off.

Support cable bracket

Tilt the tailgate to about 30° from vertical and pull up the right side of the

Tilt the tailgate to nearly 30° from vertical and pull up the right side of the tailgate to unhook the right side.

Slide the tailgate a little to the right to unhook the left side.

Slide the tailgate a petty to the right to unhook the left side.

To attach the tailgate, follow the removal procedure in reverse gild.

Rear step bumper

For rear end protection and easier step-up loading.

For rear stop protection and easier pace-upward loading.

To get on the rear footstep bumper, utilise the shaded area in the illustration.

CAUTION

■Before removing the tailgate (vehicles with rear view monitor organization)

Disconnect the wire harness betwixt the back-up camera and the vehicle.

Failure to exercise so may issue in serious injury or harm to the vehicle components.

■Caution while driving

Observe the following precautions.

Failure to do so may result in expiry or serious injury.

●Do not drive with the tailgate open.

●Do not let anyone ride on the rear stride bumper.

NOTICE

■To prevent harm to the tailgate wire harness (vehicles with rear view monitor system)

Practise not pull out all of the tailgate wire harness before open the tailgate.

■To prevent damage to the photographic camera lens (vehicles with rear view monitor system)

Store the removed tailgate with the back-up photographic camera lens facing up.

■After closing the tailgate

Try pulling it toward you to brand sure information technology is deeply locked.

■To preclude impairment to the rear stride bumper

Do not allow more than than one person to get on the rear step bumper at a fourth dimension.

Access doors (Access Cab models but)

The access door (rear door) can be opened using the inside handle. Open the front door widely Pull (from the outside) or push (from the inside) the inside handle of the access door. Open up the ...

Other materials:

Full general Information
GENERAL Data A large number of ECU controlled systems are used in the TOYOTA TACOMA. In general, ECU controlled systems are considered to be very intricate, requiring a high level of technical knowledge to troubleshoot. However, about problem checking procedures only involv ...

Installation
INSTALLATION Procedure 1. INSTALL CLUTCH PEDAL NO.ane CUSHION (a) Install the clutch pedal No. 1 cushion to the clutch pedal sub-assembly. ii. INSTALL CLUTCH PEDAL SHAFT Neckband (a) Apply MP grease to the clutch pedal shaft collar. Text in Illustration MP grease (b) ...

Diagnosis Organisation
DIAGNOSIS SYSTEM Bank check DLC3 (a) Check the DLC3. Click hither FUNCTION OF Alert INDICATOR AND MESSAGE (a) If the lane departure warning system is non functioning properly, the commuter is warned by the lane difference warning indicator and multi-information brandish warning message on the combinat ...